Interior; Door Panels; Removal & Installation - Ford Ranger Maintaince And Repair Manual

INTERIOR

Door Panels

REMOVAL & INSTALLATION
1991−92 Ranger
1. Open the window. Remove the armrest.
2. Remove the door handle screw and pull off the handle.
3. If equipped with manual windows, remove the window regulator handle screw and pull off the
handle.
1. If equipped with power windows, remove the power window switch housing.
2. If equipped with manual door locks, remove the door lock control.
3. If equipped with power door locks, remove the power door lock switch housing.
4. If equipped with electric outside rear view mirrors, remove the power mirror switch housing.
5. Using a flat wood spatula, insert it carefully behind the panel and slide it along to find the push−pins.
When you encounter a pin, pry the pin outward. Do this until all the pins are out. NEVER PULL ON
THE PANEL TO REMOVE THE PINS!
6. Installation is the reverse of removal.
Explorer/Mountaineer and 1993−99 Ranger
1. Open the window.
2. Unscrew the door lock knob.
3. On Explorer/Mountaineer, remove the 2 screws retaining the trim panel located above the door
handle.
4. On Ranger, remove the two screws in the armrest and remove it.
INTERIOR 1103