2.
Remove the screws, one at each corner, attaching the grille to the headlight housings.
3.
On Mountaineer and 1995−99 Explorer, remove the head light lens assemblies to gain access to the
grille retaining screws on the ends.
4.
Carefully push inward on the snap−in retainers and disengage the grille from the headlight housings.
5.
Installation is the reverse of removal.
To remove the grille assembly, first remove all of the screws and fasteners ...
... then carefully push inward and lift up to disengage the remaining snap−in fasteners
Outside Mirrors
REMOVAL & INSTALLATION
1090
HOW TO USE THIS BOOK
Outside Mirrors