17.
If not already attached, connect the fuel hoses and lines. Make sure the fuel supply, fuel return (if
present) and the vapor vent attachments are made properly. If not already attached, connect the
sending unit.
18.
If removed, install the fuel tank skid plate.
19.
Lower the vehicle.
20.
Fill the tank with fuel and check all connections for leaks.
Sending Unit
REMOVAL & INSTALLATION
Please refer to Fuel Pump, Removal & Installation.
Chilton® Automotive Information Systems. © 2004 Thomson Delmar Learning.
Sending Unit
HOW TO USE THIS BOOK
647