Ford Ranger Maintaince And Repair Manual page 1064

1. Support the bumper. Disconnect electrical pigtails, if applicable.
2. Remove the nuts and bolts attaching the bumper brackets to the frame. Once the bumper is removed
from the truck, remove the brackets from the bumper.
3. Remove the valance panel and rubstrip from the bumper as required.
4. Installation is the reverse of removal. Use a leveling tool to ensure a level installation before
tightening the bolts.
5. Support the bumper and torque the bracket−to−frame bolts to specifications.
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
Exploded view of the rear step bumper assembly
Click to enlarge
1087