To install:
4.
Position the washer and insulator on the shock absorber rod and position the shock absorber to the
upper frame bracket mount.
5.
Position the insulator and washer on the shock absorber rod and install the attaching nut loosely.
6.
Position the shock absorber to the lower mounting stud and install the attaching nut loosely.
7.
Tighten the lower shock attaching bolts to 39−53 ft. lbs. (53−72 Nm), and the upper shock attaching
bolts to 25−34 ft. lbs. (34−46 Nm).
Mountaineer, 1995−99 Explorer and 1998−99 Ranger
Exploded view of the Mountaineer, 1995−99 Explorer and 1998−99 Ranger front shock
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
absorber
Click to enlarge
863