3.
Remove the valve cover gasket from the cover.
To install:
4.
Thoroughly clean the gasket mating surfaces on the cover and the cylinder head.
5.
Install a new gasket to the valve cover.
6.
Place the valve cover onto the cylinder head and install all of the retaining bolts finger−tight.
7.
Alternately tighten the bolts to the proper specification.
8.
If removed, install the EGR supply tube.
9.
Install any electrical connections which were removed.
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
Exploded view of the 2.3L and 2.5L engine rocker arm cover
Click to enlarge
259