Kickdown Cable - Ford Ranger Maintaince And Repair Manual

11. On 1992−99 vehicles, turn the adjuster thumb wheel to properly position the pointer until it is
centered on the overdrive graphic.
12. If removed, install the ignition switch lock cylinder.
13. Install the upper and lower steering column shrouds and the steering wheel.
14. Remove the weight from the lever.
15. Operate the shift select lever in all positions and ensure that the indicator pointer aligns with all of the
position graphics.

KICKDOWN CABLE

The kickdown cable is self−adjusting over a tolerance range of 1 in. (4mm). If the cable requires
readjustment, reset the by depressing the semi−circular metal tab on the self−adjuster mechanism and pulling
the cable forward (toward the front of the vehicle) to the "Zero'' position setting. The cable will then
automatically readjust to the proper length when kicked down.
KICKDOWN CABLE
HOW TO USE THIS BOOK
... the other style is mounted to the underside of the column
Click to enlarge
791