HOW TO USE THIS BOOK
Turn Signal and Hazard Flasher Locations
Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To
gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering
column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until
the spring clips disengage from the instrument panel.
The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is
mounted on the rear of the fuse panel.
Chilton® Automotive Information Systems. © 2004 Thomson Delmar Learning.
Turn Signal and Hazard Flasher Locations
751