Ford Ranger Maintaince And Repair Manual page 860

Exploded view of the 1991−94 Explorer stabilizer bar and related parts−Ranger similar
1. As required, raise and support the vehicle safely.
2. Remove the nuts and washer and disconnect the stabilizer link assembly from the front I−beam axle.
3. Remove the mounting bolts and remove the stabilizer bar retainers from the stabilizer bar assembly.
4. Remove the stabilizer bar from the vehicle.
To install:
5. Place stabilizer bar in position on the frame mounting brackets.
6. Install retainers and tighten retainer bolt to 35−50 ft. lbs. (47−67 Nm). If removed, install the
stabilizer bar link assembly to the stabilizer bar. Install the nut and washer and tighten to 30−41 ft.
lbs. (40−55 Nm).
7. Position the stabilizer bar link in the I−beam mounting bracket. Install the bolt and tighten to 30−41
ft. lbs. (40−55 Nm).
Mountaineer, 1995−99 Explorer and 1998−99 Ranger
874
HOW TO USE THIS BOOK
Click to enlarge
REMOVAL & INSTALLATION