5.
Disconnect the antenna and wiring connectors from the radio.
To install:
6.
Connect the wiring and slide the radio into the instrument panel. Ensure that the rear mounting
bracket is engaged on the mounting track in the panel.
7.
If removed, install the finish panel
8.
Connect the battery cable.
9.
Check the operation of the radio.
Speakers
REMOVAL & INSTALLATION
Never operate the radio with one of the speakers disconnected. Damage to the radio can occur.
Speakers
HOW TO USE THIS BOOK
Disconnect the antenna ...
... and the electrical wire harness plugs from the back of the radio
WARNING
689