Ford Ranger Maintaince And Repair Manual page 1036

1. Raise the vehicle and remove the wheel and brake drum.
2. On 1991−92 models, remove the locknut on the threaded rod and disconnect the cable from the
equalizer.
3. On 1993−99 models, relieve the parking brake cable tension as outlined under cable adjustments.
Disconnect the left rear cable from the front cable. For the right rear cable, disconnect it from the
cable equalizer and rear guide bracket.
9
4. Use a / in. (14mm) wrench and compress the prongs that retain the cable housing to the frame
16
bracket, and pull the cable and housing out of the bracket.
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
View of the rear brake cable mounting assembly
Click to enlarge
1057