Ford Ranger Maintaince And Repair Manual page 894

To remove the stabilizer bar, first unbolt the stabilizer bar end−to−radius arm links ...
... then remove the bar retainer strap bolts followed by the bar and its bushings
If necessary, remove the end link−to−radius arm mounting bolts to remove the end links
1991−94 Explorer
1. As required, raise and support the vehicle safely.
2. Remove the nuts and washer and disconnect the stabilizer link assembly from the front I−beam axle.
3. Remove the mounting bolts and remove the stabilizer bar retainers from the stabilizer bar assembly.
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
909