Replacement - Ford Ranger Maintaince And Repair Manual

Hide thumbs Also See for Ranger:

Table of Contents

HOW TO USE THIS BOOK

Example of a badly deteriorated exhaust pipe

Inspect flanges for gaskets that have deteriorated and need replacement

Some systems, like this one, use large O−rings (donuts) in between the flanges

REPLACEMENT

There are basically two types of exhaust systems. One is the flange type where the component ends are

attached with bolts and a gasket in−between. The other exhaust system is the slip joint type. These

components slip into one another using clamps to retain them together.

Allow the exhaust system to cool sufficiently before spraying a solvent exhaust fasteners. Some solvents are

highly flammable and could ignite when sprayed on hot exhaust components.

Before removing any component of the exhaust system, ALWAYS squirt a liquid rust dissolving agent onto

the fasteners for ease of removal. A lot of knuckle skin will be saved by following this rule. It may even be

wise to spray the fasteners and allow them to sit overnight.

Mountaineer Explorer