Exploded view of the right−hand axle shaft assembly and related components
1.
Loosen the front wheel lug nuts.
2.
Raise and support the vehicle safely. Remove the wheel and tire assembly.
3.
Remove the disc brake calipers and support the caliper on the vehicle's frame rail.
4.
Remove the hub locks and lock nuts.
5.
Remove the hub and rotor.
6.
Remove the nuts retaining the spindle to the steering knuckle. Tap the spindle with a plastic or
rawhide hammer to jar the spindle from the knuckle.
7.
Remove the front disc brake rotor shield.
The left−hand axle shaft is engaged inside of the front carrier assembly. Depending on how the truck is
sitting (especially if it is not level), some fluid may leak out of the front carrier assembly. A small drip
pan should can be placed underneath the front carrier as a precautionary measure.
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
Click to enlarge
825