To install:
6.
Prior to installing the shift lever, lubricate the shift lever ball stud, using C1AZ−19590−B
(ESA−M1C75−B) or equivalent.
7.
Fit the shift lever into place and install the retaining bolts. Tighten the retaining bolts to specifications.
8.
Install the rubber boot and retaining screws.
9.
If the shift lever knob was removed, heat it to 140°−180°F (60°−82°C), using a heat gun. Tap the
knob onto the shift lever, using a
10.
Place the shift lever in Nposition. Then, align the shift pattern plastic insert with the vehicle centerline
and install it to the shift lever knob.
Neutral Sensing Switch
All manual transmission vehicles are equipped with a neutral sensing switch. The neutral sensing switch
signals the vehicle on−board computer, which allows the vehicle to start only when the transmission is in N.
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
Exploded view of the transmission shifter lever assembly
Click to enlarge
7
/
in. (11mm will work) socket and mallet.
16
757