Remove the lower radiator hose from the water pump. Position a drain pan underneath to catch
4.
Remove the lower radiator hose from the water pump.
5.
On 1997−99 Explorer/Mountaineer models, remove the radiator.
6.
Loosen the water pump pulley attaching bolts.
7.
Except 1997−99 Explorer/Mountaineer models, loosen the alternator mounting bolts and remove the
belt. On vehicles with air conditioning, remove the tensioner pulley, alternator and bracket.
8.
Except 1997−99 Explorer/Mountaineer models, remove the A/C compressor and power steering
pump mounting bracket, without disconnecting the lines, and set off to the side.
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
any coolant
Loosen the water pump pulley attaching bolts ...
... before removing the accessory drive belt ...
329