Ford Ranger Maintaince And Repair Manual page 240

HOW TO USE THIS BOOK
Disconnect all wires connected to the starter, including this ground wire on the starter moutnting
bolt stud
3. Tag and disconnect the wiring at the starter.
WARNING
When detaching the hardshell connector at the S−terminal, grasp the plastic shell to pull it off. Do not pull on
the wire itself. Ensure to pull the connector straight off to prevent damage to the connector and S−terminal. If
any part of the connector is damaged, replace the damaged component.
Some starters use a self−threading bolt to hold the starter cable
REMOVAL & INSTALLATION 231