Exploded view of the Camshaft Position (CMP) sensor mounting for the 3.0L engine−4.0L and
To install:
8.
If the plastic locator cover is not attached to the replacement camshaft position sensor, attach a
synchro positioning tool, such as Ford Tool T89P−12200−A or equivalent. To do so, perform the
following:
1.
Engage the sensor housing vane into the radial slot of the tool.
2.
Rotate the tool on the camshaft sensor housing until the tool boss engages the notch in the
sensor housing. The cover tool should be square and in contact with the entire top
surface of the camshaft position sensor housing.
558
HOW TO USE THIS BOOK
5.0L engines are similar
Click to enlarge
REMOVAL & INSTALLATION