Ford Ranger Maintaince And Repair Manual page 718

1991−92 Ranger and Explorer (up to 1994) front turn signal and side marker lens assembly
1. Remove the screws retaining the headlight and trim assembly. On Explorer, remove the grille.
2. Carefully rotate the headlight and trim assembly away from the vehicle, rotating the inboard side
away from the vehicle.
3. Remove the side marker, parking and turn signal bulbs and sockets from the headlamp and trim
assembly. They can be removed by turning them.
4. If replacing a lens, remove the retaining screws for the lens to be changed and remove it from the
headlight door.
To install:
5. If removed, install the removed lens assembly
6. Install the bulbs and sockets.
7. Install the headlight and trim assembly.
8. Check the operation of the lights.
1993−99 RANGER AND 1995−99 EXPLORER/MOUNTAINEER MODELS
724
HOW TO USE THIS BOOK
Click to enlarge
REMOVAL & INSTALLATION