Oil Pressure Sender and Switch
Oil pressure senders are used for oil pressure gauges, whereas the oil pressure switches are used for
vehicles equipped only with a low oil pressure warning lamp.
The oil pressure senders/switches are located as follows:
•
2.3L, 2.5L engine−Left side rear of the engine, in the cylinder head
•
3.0L engine−Behind the right cylinder head, in the engine block
•
2.9L and 4.0L engines−Left side front of the engine, below the cylinder head in the engine block
•
5.0L engines−Left−hand front of the engine, below the rocker arm cover
TESTING
Oil Pressure Sender and Switch
HOW TO USE THIS BOOK
Oil pressure sender and gauge wiring schematic
Click to enlarge
241