HOW TO USE THIS BOOK
Typical clutch alignment tool, note how the splines match the transmission's input shaft
Use the clutch alignment tool to align the clutch disc during assembly.
11.
When reinstalling the original pressure plate and cover assembly, align the assembly and flywheel
according to the marks made during the removal operations. Position the pressure plate and cover
assembly on the flywheel, align the pressure plate and disc, and install the retaining bolts that fasten
the assembly to the flywheel. Tighten the bolts to 15−25 ft. lbs. (21−35 Nm) in the proper sequence.
Remove the clutch disc pilot tool.
772
REMOVAL & INSTALLATION