Removal & Installation - Ford Ranger Maintaince And Repair Manual

2.3L, 2.5L engines−left−hand coil pack
• Terminal 1 (coil 4)−spark plugs 2 and 3
• Terminal 3 (coil 3)−spark plugs 1 and 4
5.0L engines−right−hand coil pack
• Terminal 1 (coil 2)−spark plugs 3 and 5
• Terminal 3 (coil 1)−spark plugs 1 and 6
5.0L engines−left−hand coil pack
Terminal 1 (coil 4)−spark plugs 2 and 8
•
Terminal 3 (coil 3)−spark plugs 4 and 7
•
If the resistance for all of the readings was between 6,500−11,500 ohms, the ignition coils are OK. If any of
the readings was less than 6,500 ohms or more than 11,500 ohms, replace the corresponding coil pack.
On 2.3L, 2.5L and 5.0L engines, if one coil pack is found to be defective, the other pack does not need to
be replaced.
REMOVAL & INSTALLATION
All engines, except the 2.3L, 2.5L and 5.0L engines, utilizes one coil pack containing three separate
coils. The 2.3L, 2.5L and 5.0L engines use two coil packs containing two separate coils each.
TESTING
HOW TO USE THIS BOOK
201