To remove the rear brake drum, first safely raise the rear of the vehicle and remove the wheel ...
2.
Remove the hub cap and the wheel/tire assembly. Remove the 3 retaining nuts and remove the brake
drum. It may be necessary to back off the brake shoe adjustment in order to remove the brake drum.
This is because the drum might be grooved or worn from being in service for an extended period of
time.
... then grasp hold of the drum and pull it from the axle flange and brake shoes
3.
Before installing a new brake drum, be sure and remove any protective coating with carburetor
degreaser.
4.
Install the brake drum in the reverse order of removal and adjusts the brakes.
INSPECTION
1018
HOW TO USE THIS BOOK
REMOVAL & INSTALLATION