Camshaft Position (Cmp) Sensor - Ford Ranger Maintaince And Repair Manual

... then remove the sensor from the throttle body by lifting straight up to disengage the throttle
To install:
4. Position the TP sensor against the throttle body housing, ensuring that the mounting screw holes are
aligned. When positioning the TP sensor against the throttle body, slide the sensor straight onto the
housing.
5. Install and tighten the sensor mounting screws until snug.
6. Attach the wiring harness connector to the sensor, then connect the negative battery cable.
The TP sensor is not adjustable.

Camshaft Position (CMP) Sensor

OPERATION
The CMP sensor provides the camshaft position information, called the CMP signal, which is used by the
Powertrain Control Module (PCM) for fuel synchronization.
REMOVAL & INSTALLATION
HOW TO USE THIS BOOK
Remove the two attaching screws ...
blade (arrow)
553