Alignment - Ford Ranger Maintaince And Repair Manual

To install:
1. Install the hinge to liftgate door and tighten the attaching bolts.
2. Install the hinge to roof header panel and tighten the nut.
3. Adjust the liftgate hinge as necessary.
4. Securely tighten the retaining bolts. Reposition and trim panels.

ALIGNMENT

On Explorer, the liftgate glass should not be open while the liftgate is open. Make sure the window is
closed before opening the liftgate.
The liftgate can be adjusted slightly in or out and side to side by loosening the hinge−to−header nut or bolt.
Some up and down adjustment can be accomplished by loosening the hinge bolts on the liftgate and moving
the gate up or down. The liftgate should be adjusted for even and parallel fit with adjoining panels.
The door latch strikers can also be adjusted. Loosen the striker center bolt and move the assembly to a new
position. Check that the door latches and unlatches easily.
ALIGNMENT
HOW TO USE THIS BOOK
... then pull the gas cylinder's end from the ball socket
1081