Exploded view of the 5.0L engine oil pump and pick−up assembly
9.
Installation is the reverse of removal. Submerge the pump in clean engine oil to prime it. Tighten the
pump attaching bolts to 13−15 ft. lbs. (17−21 Nm) for the 4.0L engine and 23−31 ft. lbs. (30−43 Nm)
for the 5.0L engine.
Crankshaft Damper
REMOVAL & INSTALLATION
1.
Disconnect the negative battery cable for safety.
2.
Remove the engine fan/clutch assembly and shroud.
3.
Remove the accessory drive belt.
4.
If equipped, unbolt the crankshaft pulley from the damper.
370
HOW TO USE THIS BOOK
Remove the two oil pump attaching bolts−4.0L engine shown
Click to enlarge
Crankshaft Damper