Ford Ranger Maintaince And Repair Manual page 829

Hide thumbs Also See for Ranger:

Table of Contents

Insert the wheel bearing and seal remover, T85L−1225−AH or equivalent, and a slide hammer into

the axle bore and position it behind the bearing so the tanks on the tool engage the bearing outer race.

Remove the bearing and seal as a unit.

If removed, lubricate the new bearing with rear axle lubricant and install the bearing into the housing

bore. Use axle tube bearing replacer, T78P−1225−A or equivalent.

Apply Multi−Purpose Long−Life Lubricant, C1AZ−19590−B or equivalent, between the lips of the

axle shaft seal.

HOW TO USE THIS BOOK

Slide the axle out of the axle tube. Use care to not damage the bearing or seal

Axle shaft seal and bearing removal

Click to enlarge

REMOVAL & INSTALLATION

Troubleshooting

Mountaineer Explorer