The Qos Cli Command Flow - Enterasys Matrix 7G4270-09 Configuration Manual

The QoS CLI Command Flow

The QoS CLI Command Flow
Procedure
show commands to verify the configuration.
Procedure 1 Class of Service CLI Configuration Command Summary
Step
1.
2.
3.
4.
5.
6.
7.
February 22, 2008
1 provides a CLI flow summary of each step in the configuration flow along with the
Task
Inspect both the TxQs and IRL support for the
installed ports. This information is used to
determine the module port type for port group.
Set the CoS transmit queue port group
configuration by mapping a physical port list to a
port group for purposes of TxQ configuration.
Optionally associate a name and the
configuration of a TxQ weighted fair queue
behavior configuration. Verify the new
configuration.
Set the CoS inbound rate-limit port group
configuration by mapping a physical port list to a
port group for purposes of IRL configuration,
optionally allowing the association of a name for
this configuration. Verify the new configuration.
Configure a Class of Service transmit queue port
resource entry, by mapping a port group with a
transmit queue and applying a TxQ rate shaping
value to the mapping. Verify configuration
changes.
Configure a CoS inbound rate limiting index
entry, by mapping a port group with a rate-limit
value, along with the ability to optionally set
syslog, trap, and/or disable port behaviors
should the limit be exceeded. This index is used
by the rate-limit option when setting an IRL cos
reference.
Set a CoS transmit queue reference
configuration, by mapping a port group to a
queue resource ID and associating the mapping
with a transmit reference. Verify new CoS
reference configuration.
Set a CoS inbound rate limiting reference
configuration, by mapping a port group with a
rate limiter resource ID and associating the
mapping with an IRL reference. Verify the new
CoS reference configuration.
Command(s)
Matrix(su)->show cos port-type txq
Matrix(su)->show cos port-type irl
Matrix(su)->set cos port-config txq
port_group.port_type name name
ports ports arb-percentage
perc_list
Matrix(su)->show cos port-config txq
port_group.port_type
Matrix(su)->set cos port-config irl
port_group.port_type name name
ports ports_list
Matrix(su)->show cos port-config irl
Matrix(su)->set cos port-resource
txq port_group.port_type tx_queue
unit unit rate rate
Matrix(su)->show cos port-resource
txq port_group.port_type
Matrix(su)->set cos port-resource
irl port_group.port_type index
unit unit rate rate syslog
setting trap setting disable-port
setting
Matrix(su)->show cos port-resource
irl port_group.port_type
Matrix(su)->set cos reference txq
port_group.port_type reference
queue queue
Matrix(su)->show cos reference txq
port_group.port_type
Matrix(su)->set cos reference irl
port_group.port_type reference
rate-limit IRLreference
Matrix(su)->show cos reference irl
port_group.port_type
Page 21 of 29