Clear Radius Server; Clear Server Group - D-Link DWS-1008 Cli Reference Manual

clear radius server

Removes the named RADIUS server from the switch configuration.
Syntax: clear radius server server-name
server-name
Defaults: None
Access: Enabled.
Examples: The following command removes the RADIUS server rs42 from a list of remote AAA
servers:
DWS-1008# clear radius server rs42
success: change accepted.
See Also:
• set radius server
• show aaa

clear server group

Removes a RADIUS server group from the configuration, or disables load balancing for the
group.
Syntax: clear server group group-name [load-balance]
group-name
load-balance
Defaults: None
Access: Enabled.
Usage: Deleting a server group removes the server group from the configuration. However, the
members of the server group remain.
Examples: To remove the server group sg-77 type the following command:
DWS-1008# clear server group sg-77
success: change accepted.
D-Link DWS-1008 CLI Manual
Name of a RADIUS server configured to perform remote AAA services for
the switch.
Name of a RADIUS server group configured to perform remote AAA services
for switches.
Ability of group members to share demand for services among servers.
1