Show Lldp Statistics - D-Link DWL-8500AP Command Reference Manual

Format
Mode
Interface
Link
Transmit
Receive
Notify
TLVs
Mgmt

show lldp statistics

Use this command to display the current LLDP traffic and remote table statistics for a specific
interface or for all interfaces.
Format
Mode
Last Update
Total Inserts
Total Deletes
Total Drops
Total Ageouts Total number of times a complete remote data entry was deleted because the
The table contains the following column headings:
Interface
Transmit Total Total number of LLDP packets transmitted on the port.
Receive Total Total number of LLDP packets received on the port.
Discards
Errors
Ageouts
TVL Discards The number of TLVs discarded
TVL Unknowns Total number of LLDP TLVs received on the port where the type value is in
show lldp interface {<slot/port> | all}
Privileged EXEC.
The interface in a slot/port format.
Shows whether the link is up or down.
Shows whether the interface transmits LLDPDUs.
Shows whether the interface receives LLDPDUs.
Shows whether the interface sends remote data change notifications.
Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV
codes can be 0 (Port Description), 1 (System Name), 2 (System Description),
or 3 (System Capability).
Shows whether the interface transmits system management address informa-
tion in the LLDPDUs.
show lldp statistics {<slot/port> | all}
Privileged EXEC
The amount of time since the last update to the remote table in days, hours,
minutes, and seconds.
Total number of inserts to the remote data table.
Total number of deletes from the remote data table.
Total number of times the complete remote data received was not inserted due
to insufficient resources.
Time to Live interval expired.
The interface in slot/port format.
Total number of LLDP frames discarded on the port for any reason.
The number of invalid LLDP frames received on the port.
Total number of times a complete remote data entry was deleted for the port
because the Time to Live interval expired.
the reserved range, and not recognized.
2 Switching Commands
LLDP (802.1AB) Commands 109