System Configuration Of Flash Microcomputer Programmer - Fujitsu F2MC-16LX Hardware Manual

CHAPTER 27 EXAMPLES OF MB90F474/MB90F476 SERIAL PROGRAMMING CONNECTION

27.3 System Configuration of Flash Microcomputer Programmer

This section describes the system configuration of flash microcomputer programmer.
I System Configuration of the Flash Microcomputer Programmer
Table 27.3-1 "System configuration of the flash microcomputer programmer" shows the system
configuration of the flash microcomputer programmer.
Table 27.3-1 System configuration of the flash microcomputer programmer
Type
AF220/AC4P
Main
AF210/AC4P
body
AF120/AC4P
AF110/AC4P
AZ221
AZ210
FF201
AZ290
/P2
/P4
Inquiries: Yokogawa Digital Computer Corporation
Telephone number: (81)-42-333-6224
Model with built-in Ethernet interface /100 V to 220 V power adapter
Standard model /100 V to 220 V power adapter
Model with built-in single key Ethernet interface /100 V to 220 V power adapter
Single key model /100 V to 220 V power adapter
Programmer dedicated RS232C cable for PC/AT
Standard target probe (a) length: 1 m
2
Fujitsu F MC-16LX flash microcomputer control module
Remote controller
2MB PC Card (Option) FLASH memory capacity up to 128 KB supported
4MB PC Card (Option) FLASH memory capacity of up to 512 KB supported
Function
497