Fujitsu F2MC-16LX Hardware Manual page 377

• If ANS < ANE, conversion will start with channel ANS; after conversion has been performed
up to channel 7, the setting channel will be set to Channel 0, and conversion will be
performed up to ANE.
• These bits are initialized to "000
Example:
Channel setting: Single Mode with ANS = Channel 6 and ANE = Channel 3
Operation: Conversion channel Ch6 --> Ch7 --> Ch0 --> Ch1 --> Ch2 --> Ch3
CHAPTER 19 8/10-BIT A/D CONVERTER
" at reset.
B
361