Fujitsu F2MC-16LX Hardware Manual page 7
Mb90470 series 16-bit microcontroller
Hide thumbs
Also See for F2MC-16LX:
- Hardware manual (706 pages) ,
- Application note (13 pages) ,
- Operation manual (10 pages)
Table of Contents
Advertisement
CHAPTER 16 "16-BIT RELOAD TIMER"
This chapter provides an overview of the 16-bit reload timer and its operation, and explains
the configuration and functions of its registers.
CHAPTER 17 "8/16-BIT PPG TIMER"
This chapter provides an overview of the 8/16-bit PPG timer and its operation, and explains
the configuration and functions of its registers.
CHAPTER 18 "DTP/EXTERNAL INTERRUPT UNIT"
This chapter provides an overview of the DTP/external interrupt unit, its operation, and
explains the configuration and functions of its registers.
CHAPTER 19 "8/10-BIT A/D CONVERTER"
This chapter provides an overview of the 8/10-bit A/D converter and its operation, and
explains the configuration and functions of its registers.
CHAPTER 20 "EXPANDED I/O SERIAL INTERFACE"
This chapter provides an overview of the expanded I/O serial interface and its operation, and
explains the configuration and functions of its registers.
CHAPTER 21 "UART"
This chapter provides an overview of the UART, its operation, and explains the configuration
and functions of its registers.
2
CHAPTER 22 "I
C INTERFACE"
This chapter provides an overview of the I
configuration and functions of its registers.
CHAPTER 23 "CHIP SELECTION FACILITY"
This chapter provides an overview of the chip selection facility and its operation, and
explains the configuration and functions of its registers.
CHAPTER 24 "ADDRESS MATCH DETECTION FUNCTION"
This chapter describes the address match detection function and its operation
CHAPTER 25 "ROM MIRROR FUNCTION SELECTION MODULE"
This chapter describes the functions of the ROM mirror function selection module.
CHAPTER 26 "2M BIT FLASH MEMORY"
This chapter describes the functions and operations of the 2M bit flash memory.
CHAPTER 27 "EXAMPLES OF MB90F474/MB90F476 SERIAL PROGRAMMING
CONNECTION"
This chapter shows an example of a serial programming connection using the AF220/AF210/
AF120/AF110 Flash Micro-computer Programmer by Yokogawa Digital Computer
Corporation.
"APPENDIX"
The appendix provides the memory map and lists the instructions used in the F
2
C interface and its operation, and explains the
2
MC-16LX.
iii
Advertisement
Table of Contents
