Resuming The Sector Erasure Of Flash Memory - Fujitsu F2MC-16LX Hardware Manual

26.6.6 Resuming the Sector Erasure of Flash Memory

This section describes the procedure for issuing the sector erase resume command
and resuming a suspended flash memory sector erase operation.
I Resuming the sector erasure of flash memory
To resume a suspended sector erase operation, repeatedly send the sector erase resume
command in the command sequence table (see Table 26.4-1 "Command sequence table") to
the internal flash memory.
The sector erase resume command is used to resume a sector erasure from the sector erase
suspend mode caused by a sector erase suspend command. This command is executed by
writing the erase restart code (30
area.
Issuing the sector erase restart command again during a sector erase operation will be ignored.
CHAPTER 26 2M BIT FLASH MEMORY
) while specifying an arbitrary address in the flash memory
H
491