B.9
Instruction Map
2
Each F
MC-16LX instruction code consists of 1 or 2 bytes. Therefore, the instruction
map consists of multiple pages. Table B.9-2 "Basic page map" to Table B.9-21 "XCHW
RWi, ea instruction (first byte = 7F
I Structure of Instruction Map
Bit operation
instructions
An instruction such as the NOP instruction that ends in one byte is completed within the basic
page. An instruction such as the MOVS instruction that requires two bytes recognizes the
existence of byte 2 when it references byte 1, and can check the following one byte by
referencing the map for byte 2. Figure B.9-2 "Correspondence between actual instruction code
and instruction map" shows the correspondence between an actual instruction code and
instruction map.
)" summarize the F
H
Figure B.9-1 Structure of instruction map
Basic page map
Character string
2-byte instructions
operation instructions
APPENDIX B Instructions
2
MC-16LX instruction map.
ea instructions x 9
: Byte 1
: Byte 2
551