Ima Link Alarms And Link Defects - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Table 29: IMA Group Alarms with IMA Standard Requirement Numbers (continued)
Alarm
Timing-Mismatch
Blocked
Version-Mismatch
Table 30: IMA Group Defects with IMA Standard Requirement Numbers
Defects
Start-up-FE
Config-Aborted
Config-Aborted-FE
Insufficient-Links
Insufficient-Links-FE
Blocked-FE
Timing-Mismatch
Blocked
Version-Mismatch

IMA Link Alarms and Link Defects

Table 31: IMA Link Alarms with IMA Standard Requirement Numbers
Alarm
LIF
LODS
RFI-IMA
178
Table 30 on page 178 shows the supported IMA group defects and their associated IMA
standard requirement numbers. This is displayed in the group status and control field of
an ICP cell.
Table 31 on page 178 shows the supported IMA link alarms that are reported to the IMA
unit management with their associated IMA standard requirement numbers.
IMA Standard Requirement
Number
R-138
R-139
R-140
IMA Standard Requirement Number
R-151
IMA Standard Requirement Number
R-145
R-146
R-147
R-148
R-149
R-150
R-151
Description
Loss of IMA frame
Link out of delay synchronization
Remote defect/failure
Copyright © 2017, Juniper Networks, Inc.