Ricoh M022 Service Manual page 1060

3. Appendix: SP Mode Tables
Displays the value given by the following formula:
(Target printouts/ Current printouts)
lifetime has been used up.
-091 to
The Page% counter is based on printouts, not revolutions. If the number of printouts reaches
-108
the limit, the machine enters the end condition for that unit. If the revolution count lifetime is
reached first, the machine also enters the end condition, even though the Page% counter
is still less than 100%.
091 Page (%): PCU: Bk
3
092 Page (%): PCU: C
093 Page (%): PCU: M
094 Page (%): PCU: Y
095 Page (%): Development Unit: Bk
096 Page (%): Development Unit: C
097 Page (%): Development Unit: M
098 Page (%): Development Unit: Y
103 Page (%): Image Transfer
104 Page (%): Image Transfer Cleaning
105 Page (%): Fusing Unit
106 Page (%): Fusing Roller
107 Page (%): Fusing Belt
108 Page (%): PTR Unit
[PM Counter Reset]
7804
(Unit, [Color])
Clears the PM counter.
Press the Enter key after the machine asks "Execute?", which will store the PM counter value
in SP7-906 (PM Counter - Previous) and reset the value of the current PM counter
(SP7-803) to "0".
001 Paper
314
CÓPIA NÃO CONTROLADA
100. This shows how much of the unit's expected
CÓPIA NÃO CONTROLADA
*ENG [0 to 255 / - / 1 %/step]
*ENG [0 to 255 / - / 1 %/step]