Time-Sensitive Operator Assistance Configuration - Avaya CS700 Administration And Maintenance

Configuring System-Wide Settings
Table 8: Supervision Configuration Parameters (continued)
Parameter
Wink Timeout
Line Fault

Time-sensitive Operator Assistance Configuration

The time sensitive operator help feature allows the administrator to establish time-based rules
for delivering operator help to conference participants. You can configure up to 49 rules.
To configure time sensitive operator help settings:
1. Select System Administrator Main > Configurations > Timed Assist Configuration.
The system displays the
Timed Assistance
+-----------------------------Timed Assistance--------------------------+
¦ Start Time
¦ --------------------------------------------------------------------- ¦
¦ ?? : ??
+-- MORE:Next/Prev--DEL:'D'/LineDEL--ADD:'I'/LineINS--MOD:Ret--EXIT:Esc +
You can press:
I or I
NSERT
l
D to remove the selected rule.
l
E
NTER
l
66 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
Description
Specifies how long the system waits for wink-back from the far
end before disconnecting the line.
Note:
Note:
Specifies whether or not the system takes faulted lines off-hook.
Operators fault lines to take them temporarily out of service.
OFF — Faulted lines remain on hook, but the system
l
ignores dial-ins and does not allow dial-outs. Incoming
calls receive a ring, but the call is not answered.
ON (default) — Faulted lines are taken off hook so that
l
incoming calls receive a busy signal.
Timed Assistance
End Time
?? : ??
to insert a new rule.
to edit the current rule
Not supported in this release.
screen.
Date Type
DEFAULT WAIT_FOR_HELP
Action
4 of 4
¦
¦