Avaya CS700 Administration And Maintenance page 257

Note:
Chapter 2 Maintenance on the Relational Database Guide, includes
Note:
recommendations and options for batch loading data.
Follow this procedure to load pin codes into the database:
1. Log on to the bridge with the brdgdbo account:
login: brdgdbo
Password:*******
2. Change directories to the location of the text files that you plan to load to the system.
$ cd /usr/dcb/dbase/bridgedb/batchdata
3. Verify that the directory contains the files required for the load.
ls
The system displays a list of files that includes:
pins.txt
pinlist.txt
4. Run the batch load script located in the /usr/dcb/dbase/bridgedb/ directory:
cd..
$ ./batchload_pins.sh -load
Or, if using text files created on a system prior to version 3.3, use this command:
$ ./batchload_pins.sh -pre33file
The system displays this message:
This mode supports loading PIN lists and codes into the database
in several sub-modes:
Append - Appends PIN lists & codes in the batch load file(s) to the database.
Purge - First purges the existing PIN lists & codes from the database and then
adds the PIN lists & codes in the batch load file(s)to the database.
Replace - Replace will only replace those PIN lists in the database where a
replacement PIN list is provided for in the batch load file(s). In addition, any
PIN codes in the batch load file(s) not in a PIN list will be added to the
database.
Enter 'a' for append
Enter 'p' for purge
Enter 'r' for replace
Enter 'q' to quit
Loading PIN Codes and PIN Lists to into Bridgedb
Issue 1 August 2007 257