Appendix C: System Maintenance; Introduction; Hot Swapping; Hot Swapping A Dsp Card - Avaya CS700 Administration And Maintenance

Appendix C: System Maintenance

Describes recommended system cleaning procedures, guidelines for using the Power On/Off
switch and the Reset button, and the DSP card hot swap procedure.

Introduction

This chapter is organized as follows:

Hot Swapping

l
cards in an activated system.
Monthly Maintenance Procedures
l
hardware, and cleanup extraneous files.
Powering Down
l
rebooting the system.
!
CAUTION:
Use an ESD (electric static discharge) strap when working with system
CAUTION:
components to reduce the risk of causing ESD damage to the system.
Hot Swapping
This section describes how to safely replace a DSP and T1 cards with another like card while
the system is activated.

Hot Swapping a DSP Card

This section describes how to safely replace a DSP card with another DSP card while the
system is activated. (See
describes the recommended procedures for replacing DSP cards and T1
describes how to clean system components, verify
describes guidelines and procedures for turning the power on and off and
Standard System Components on page 29 to identify a DSP board.)
Issue 1 August 2007 323