Avaya CS700 Administration And Maintenance page 35

Card Numbering
Log files and network statistic reports reference network and DSP cards by number. The
system assigns numbers to cards based on their relative positions in the chassis and not
according to the slots they occupy in the chassis. Also, DSP cards and network cards each
have a separate numbering series. When the optional embedded CPU (eCPU) is installed on
the system, it is located in the first slot.
Figure 4 illustrates the card numbering scheme.
Figure 4: Network and DSP Card Numbering
DSPs
e 1 2 3 4 5 6
C
P
U
Input/Output Ports
Table 5 lists and describes system ports. I/O ports may either be located on the back, front, or
both locations.
Table 5: I/O Port Descriptions
Port Location
COM 1 Front and
(Console) Back
COM 2 Back
(Modem)
Keyboard Back
Mouse Back
Keyboard and Front
Mouse
NICs
CS700
CPU 6 5 4 3 2 1
Front View
Description
RS232 serial port, 9-pin
micro "D" female
RS232 serial port, 9-pin
micro "D" female
Mini DIN, standard
PS-2 pinout
Mini DIN, standard
PS-2 pinout
Y-cable
Hardware Features
NICs
DSPs
CS780
e 1 2 3 1 2 3 CPU
C
P
U
Front View
Purpose
"Dumb serial terminal"
connection.
Modem connection.
Keyboard connection. The
port on either the CPU card
or Processor Transition
card can be used, but not
simultaneously.
Mouse connection.
Keyboard and mouse
connection.
Issue 1 August 2007
1 of 3
35