Avaya CS700 Administration And Maintenance page 47

3. Configure parameter values as desired. See
4. Save (or cancel) your changes.
Table 7: System Configuration Parameters
Parameter
System Name
Entry Tone
Exit Tone
DTMF
Acknowledge
Description
Displays the TCP/IP host name assigned to the system when
system software is installed. The name appears on screens and in
various system files and serves as the alias for the system IP
address.
Specifies the number of beeps in an entry tone when a participant
enters a conference. Entry tones are specified for conferences on a
per-conference basis. Operators can enable entry tones in an
attended conference, and entry tones can be specified for
scheduled conferences.
Single Beep (default)
l
Double Beep
l
Refer to documentation for details on enabling entry
Bridge Talk
tones for conferences.
Specifies the number of beeps in an exit tone when a participant
exits a conference. Exit tones are specified for conferences on a
per-conference basis. Operators can enable exit tones in an
attended conference, and exit tones can be specified for scheduled
conferences.
Single Beep (default)
l
Double Beep
l
Specifies whether or not systems sounds a tone when it receives
DTMF (Dual-Tone Multi-Frequency) dialing input.
ON — The system emits a tone when conferees press valid
l
DTMF digits on their telephones to either enter a response to
a poll question or to place themselves in either the Help or
Q&A queues. Acknowledgment tones assure conferees that
the system received their DTMF input.
OFF (default) — Conferees hear normal DTMF tones as they
l
press digits, but do not hear the special acknowledgment
tone afterward.
Table 7 for parameter descriptions.
Issue 1 August 2007
System Configuration
1 of 16
47