Avaya CS700 Administration And Maintenance page 72

Configuring System-Wide Settings
To configure system messages:
1. Select System Administrator Main > Configurations > Voice Message Configuration.
The system displays the
Voice Message Configuration
2. Select the appropriate option for each type of message listed on the screen:
Tone — Sound the currently defined tone to indicate condition.
l
Message — Play preassigned voice message (msg nnn) to indicate condition. For
l
descriptions of voice messages, see
page 98.
Both (default) — Sound the tone and play preassigned voice message to indicate
l
condition.
Use Tone or Both when an immediate warning is required. The Message setting could
delay the warning message if all annunciators are busy when the condition requiring the
warning occurs.
The settings apply to every conference supported by the system. You do not have to reboot
the system after changing settings.
Note:
Entry and Exit can be implemented on a per-conference basis using the
Note:
conference Scheduler's Entry Tone and Exit Tone settings (see
7: Configuring Conference Scheduler
3. Save (or cancel) your changes.
72 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
Voice Message Configuration
+----------Voice Message Configuration----------+
¦
¦ ODO Messages
¦ Security On
¦ Security Off
¦ Conference Entry
¦ Conference Exit
¦ Security Code Error1&2
¦ Security Code Error3
¦ PIN Code Error1&2
¦ PIN Code Error3
¦ Warning Tone(15-1 mins) (msg192-206) BOTH
¦ Warning Tone(0 mins)
+----------------- ESC to Exit -----------------+
screen.
(msg181-183) BOTH
(msg184) BOTH
(msg185) BOTH
(msg186) BOTH
(msg187) BOTH
(msg188) BOTH
(msg189) BOTH
(msg190) BOTH
(msg191) BOTH
(msg207) BOTH
Table 16: Flexible Annunciator Messages
on page 169).
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
¦
on
Chapter