System Supervision - Avaya CS700 Administration And Maintenance

Configuring System-Wide Settings
Table 7: System Configuration Parameters (continued)
Parameter
Flex Leader Code
MoHang Msg Dest
Conf Sec Msg Dest
NRP Seconds
Web ID Length
DTMF Conf Hangup

System Supervision

Supervision configuration specifies dial delay, annuciator delay, disconnect mode, and
disconnect notification mode.
62 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
Description
Provides the option to have leader join a Flex flow conference upon
entry of one conference code instead of the two required by default.
ON - Leader joins conference upon entry of one code.
l
Note:
Code must be unique
Note:
OFF - Default requirement of two codes for leader entry to
l
Flex flow call
Determines if a message plays to moderator or to conference when
moderator presses *98 to change the conference hangup option.
INDVL - Message plays to moderator only
l
CONF - Message plays to entire conference
l
Determines if message plays to moderator or to conference when
moderator presses *7 to change conference security setting.
INDVL - Message plays to moderator only
l
CONF - Message plays to entire conference
l
The # terminator after recording your name for NRP is optional.
Setting can be from 0 to 16.
0 - # is required to join conference after stating name (default)
l
1-16 - Number of seconds system waits to automatically
l
place line into conference
The number of digits caller can enter to associate a Web
conference with the audio conference. Limit is 60
Determines if moderator can hang up their conference via DTMF
ENABLED - Moderator can press ## to hang up conference
l
DISABLED - DTMF conference hangup not available
l
16 of 16