Avaya CS700 Administration And Maintenance page 171

2. Set the required parameter values.
parameters.
3. Save (or cancel) your changes.
Table 31: Conference Scheduler Configuration Parameters
Parameter
Group Name
Status
Invalid Code
Timeout
Table 31
Description
This is a non-editable field with the value Schedule.
Specifies whether or not the Conference Scheduler is used.
Enabled — The Scheduler is in effect for channels with
l
code partitioning enabled.
Disabled (default) — This scheduler is not in effect.
l
When using EPV, always disable the scheduler to
l
prevent local schedules from being used.
If you disable the Scheduler and are not using EPV, the
system will route all calls to the ENTER queue. If you disable
the Scheduler and are using EPV, then the EPV process is
used. .
Specifies the system response to callers who enter invalid
codes. You can configure the system to allow callers up to
three attempts (see the Scan Attempts parameter) to enter a
valid code.
Enter (default) — The system routes callers to the
l
Enter Queue.
Hang-up — The system disconnects callers.
l
The time allowed callers to enter code digits is specified by
the Scan Time parameter.
Specifies the system response to callers who fail to enter any
digits within the time specified by Scan Time parameter.
Enter (default) — The system routes callers to the
l
Enter Queue.
Hang-up — The system disconnects callers.
l
Note:
Callers using rotary style telephones cannot
Note:
enter digits and consequently always timeout.
Working with the Conference Scheduler
lists and describes the scheduler configuration
Issue 1 August 2007
1 of 6
171