Table 8: Supervision Configuration Parameters (continued)
Parameter
Disconnect
Notification
Description
Specifies whether or not disconnect messages appear on
operator workstation displays when lines disconnect from
attended conferences. Disconnect Notification provides
operators with additional information about a disconnecting line.
ON — The following message appears in the chat window
l
of each active workstation when a qualifying line
disconnects:
O: DC: 0001 NAME C:0003 NAME
where:
0 = Global Message
DC = Message Type(Disconnect)
0001 = Line Number
NAME = Line Name
C:0003 = Conference Number
NAME = Conference Name
This information is helpful in determining whether to
re-establish the connection or alert the conference
moderator of the disconnect. Like Disconnect Mode, the
Disconnect Notification only applies to attended calls that
were dialed from the bridge and hung up by the participant
(far end). Thus, the workstation quickly posts numerous
messages to the chat window.
OFF (default) — Operators are not provided disconnect
l
information.
System Supervision
3 of 4
Issue 1 August 2007
65