Log Message Codes - Avaya CS700 Administration And Maintenance

System and Log Messages

Log Message Codes

The following sections describe the error messages associated with specific codes in the
system log files. If you need more information concerning a particular error, contact Customer
Support.
Each message is in a 6-line format. The first line of each message is blank and the sixth line
contains a single semicolon:
1 -
2 - systemName_nodeName date&time
3 - AsequenceNumber.messageNumber REPT AUTO
4 - /* processName fileName lineNumber messageType/UNIXerrorString
5 - messageString */
6 - ;
Message strings may be truncated to maintain an 80-character line limit. The messages
themselves are numbered on the following pages, with each message followed by a short
paragraph describing its meaning. Variable data is represented according to the percentage (%)
conventions described below. When the set of variable strings is known and limited, the choices
are included in the message and separated by forward slashes (/).
Conventions used in the messages:
% = variable
%d = decimal number
%s = string
%x = hexadecimal number (0x%X)
354 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server