Avaya CS700 Administration And Maintenance page 376

System and Log Messages
Table 12: Hardware and Device Messages (continued)
Message Code
4119
4120
4121
376 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
Message
DSP node %d interrupts:
Sent %d, DSP got %d,
Host got %d
name %d path error code
%d
DSP %d MVIP Ref
Memory: Wrote 0x%d, got
0x%d at 0x%d
Meaning
During DSP testing, the
host sent the specified
number of interrupts to the
DSP. The number received
by the DSP and the
number received by the
host in return are also
specified.
During connectivity testing
of the named path, the
error specified by the two
digit code was detected.
The first digit identifies a
problem encountered in the
test:
1 - The digits received
identify the wrong channel
path.
2 - An unknown event was
received from a DSP.
4 - An unexpected
command was detected in
the channel used for
testing.
8 - A DSP required for the
test has failed or is not
present.
Any other hexadecimal
number recorded for the
first digit is the sum of the
above digits for the
problems indicated. The
second digit indicates the
number of DTMF digits
detected over the specified
path. Three digits must be
received that correctly
identify the channel path
being tested.
During testing of the
specified DSP, the host
wrote the specified value
and read a different value
at the specified memory
address.
6 of 8