Follow these steps:
1. Select Network Configuration > Load Outbound Port Group Cfg.
The system displays a prompt letting you know the status, such as
Port Groups Loaded
Tip:
If you receive an error when loading the Port Group configuration, check the Daily
Tip:
Log file for the current date to determine the source of the problem.
2. Press any key to return to the Network Configuration menu.
Load the Inbound Port Group Configuration
Administrators may load the IPG file into shared memory on a live system by selecting the Load
Inbound Port Group Configuration option on the Network Configuration menu.
1. Select Network Configuration > Load Inbound Port Group Cfg.
The system displays a prompt letting you know the status, such as
Loaded.
Inbound Port Groups Loaded
2. Press any key to continue.
Refer to
Inbound Port Groups (IPG)
Tip:
If you receive an error when loading the Port Group configuration, check the Daily
Tip:
Log file for the current date to determine the source of the problem.
+------------------------+
¦
¦
Port Groups Loaded
¦
+----<Press any key>-----+
+--------------------------------+
¦
¦
Inbound Port Groups Loaded
¦
+--------<Press any key>---------+
on page 79 for information on configuring the file.
Configuring Network Settings
Port Groups
Loaded.
¦
¦
¦
Inbound Port Groups
¦
¦
¦
Issue 1 August 2007
147