System Date And Time - Avaya CS700 Administration And Maintenance

Configuring System-Wide Settings

System Date and Time

You should check the system's date and time regularly.
!
WARNING:
Do not change the system date/time while conferences are active. This action
WARNING:
prevents the generation of valid CDRs and CODRs and can cause certain
time-related conference features such as automatic hang-up and termination
tones to work improperly.
Consider the following before changing the system's date and time:
The system retains all configuration data, including the date and time, during power
l
outages.
If you select the System Date/Time option while conferences are active, the system
l
displays a warning message and sounds a warning tone. Exit without changing the date/
time setting.
The system automatically adjusts the system time and date for Daylight Savings at the
l
appropriate time on the proper date. However, if the system is powered down, the time and
date revert to the previous time and date settings. Therefore, we recommend that you
save the new system date and time each time an automatic time change occurs.
The system time can be automatically synchronized with an external time source that
l
supports Network Time Protocol (NTP). Contact your Support representative for additional
information.
If you change the date while the conference scheduler is running, the system displays the
l
Updating Database
Updating Database
68 Administration and Maintenance of the CS700/CS780 Audio Conferencing Server
message:
+------------ ---Updating Database ------------+
¦
¦ The conference scheduler database is being
¦ updated. This may take up to 60 seconds.
¦ Please wait...
+------------- --- ESC to Exit ----------------+
¦
¦
¦
¦